Sea Water Desalination and Watermakers

 

Seawater desalination and water desalination watermakers manufactured by Ampac-USA, provides professional seawater desalination equipment, desalinators and water makers, direct quotes available for your seawater desalination equipment.

 

Ampac-USA Seawater desalination Systems & Equipment are among the finest in the industry. 

 

With over 15 years of Experience, Ampac-USA Introduce the All New SeaPro™ Reverse Osmosis Seawater Desalination systems also known as Watermakers for the Marine Industry converting Sea Water to Pure Drinking Water for Yachts and commercial Freightliners worldwide.

 

Ampac USA integrate marine-grade materials with craftsman attention to detail. The result is a reliable, long-lasting marine Sea Water Desalination Reverse Osmosis watermaker Systems trusted by the Marine Industry worldwide.

 

When there’s a need for fresh water in high volume, Ampac-USA Manufacture High Flow LandPro™ Sea Water Desalination Commercial Grade Reverse Osmosis Systems for Land Based Applications starting from 1,500 GPD up to 100,000 GPD (Gallons per day) using top quality components.  Our systems are delivered complete with all plumbing included ready to produce water immediately after installation.   

 

 Unlike osmosis, which is the natural tendency of pure water to flow through a membrane into impure water, reverse osmosis is achieved by applying very high pressure to seawater to counteract the osmotic flow.  Thus, seawater is forced through a semi-permeable membrane, which removes all the dissolved solids and produces fresh, potable water on the other side. This method rejects at least 98% of salts, contaminates, and pollutants from seawater.

 

Salt or brackish water first enters into the RO via a through-hull fitting and is filtered through the Sea Strainer. This feed water is then boosted to 30 psi by the Booster Pump and filtered through 25 and 5 micron Pre-filters. Oil, if present, is then separated and removed by the Oil/Water Separator. These filters remove sediments and suspended solids from the feed water prior to entering the High Pressure Pump. A Low Pressure Switch shuts down the RO in the event of low flow conditions, preventing cavitations in the High Pressure Pump.

The High Pressure Pump supplies the required force to drive the feed water through the semi-permeable Reverse Osmosis (R.O.) Membrane.  An automatic high pressure safety relief valve protects the water maker if pressure exceeds recommended levels.

The fresh water produced flows out of the Reverse Osmosis Membrane where it is up to 99.2% free of salts, minerals, and other ions. It then passes into the Product Flow Meter where the amount of potable water produced per minute is registered. Next, the Salinity Probe registers the salt content of the product water. If the water is good quality, it passes through the 1 Micron Carbon Block Post-Filter and ˝ Micron Ceramic Post-Filter, which purifies the water of unpleasant odors and taste. Finally, the last filtration process is completed by an optional Ultraviolet Sterilizer where 99.8% of all micro-organisms, including viruses and bacteria are destroyed.

 

Sea Water Desalination Watermaker Turnkey Systems from Ampac-USA
	Ampac Sea Pro™ Plus Marine Based Watermakers  From 100 to 1,000 GPD-SW with Fresh Water Auto Flush The Ampac-USA SeaPro™ System is a horizontal one-piece frame configuration with internal High Pressure Booster Pump for ease of use in compact locations.  All components within the frame are readily accessible for easy maintenance. This unit is designed to fit in tight places for Watermaker   100 GPD (  375 LPD)  $ 7,950.00 for Watermaker   200 GPD (  750 LPD)  $ 8,975.00 for Watermaker   300 GPD (1125 LPD)  $ 9,650.00   for Watermaker   600 GPD (2270 LPD) $10,750.00 for Watermaker   800 GPD (3000 LPD) $11,975.00 for Watermaker 1000 GPD (3875 LPD) $12,985.00
	Ampac Sea Pro™ Plus Marine Based Watermakers  From 1,500 to 4,500 GPD-SW with Fresh Water Auto Flush The Ampac-USA SeaPro Plus System is a horizontal one piece frame configuration designed for marine applications with internal High Pressure Booster Pump for ease of use in compact locations.  All components within the frame are readily accessible for easy maintenance. for Watermaker 1500 GPD (  5,670 LPD) $14,250.00 for Watermaker 2000 GPD (  7,500 LPD) $15,750.00 for Watermaker 3000 GPD (11,350 LPD) $19,850.00 for Watermaker 4500 GPD (17,000 LPD) $26,750.00
	Ampac Sea Pro™ Plus Marine Based Watermakers  From 6,000 to 10,000 GPD-SW with Fresh Water Auto Flush The Ampac-USA SeaPro Plus System is a horizontal one piece frame configuration designed for marine applications with internal High Pressure Booster Pump for ease of use in compact locations.  All components within the frame are readily accessible for easy maintenance for Watermaker   6,000 GPD (22,710 LPD) $32,750.00 for Watermaker 10,000 GPD (22,710 LPD) $59,850.00
	Ampac Portable Emergency Sea Water Desalination  150 & 300 GPD-SW with Fresh Water Auto Flush   In case of Natural Disasters or wars or for small boats, The Ampac-USA Portable Emergency Sea Water Desalination System is designed to treat Seawater, Well Water, or Surface Water to Potable Drinking Water Standard set by the World Health Organization Standards.   for Watermaker 150 GPD (570 LPD)
	Ampac Sea Pro™ Plus Land Based Watermakers  From 5,000 to 9,000 GPD-SW   The Ampac SeaPro5K System is a user friendly turnkey watermaker available in  horizontal configuration Pump for ease of use in compact locations.    All components within the frame are readily accessible for easy maintenance. This unit is designed to fit in tight places.   The SeaPro5K are also available in vertical and modular configurations.      for Sea Water Desalination SeaPro5000 (5000 GPD)    for Sea Water Desalination SeaPro6000 (6000 GPD)    for Sea Water Desalination SeaPro9000 (9000 GPD)
	Ampac Sea Pro™ Plus Land Based Watermakers  From 10,000 to 18,000 GPD-SW   The Ampac SeaPro10K System is a user friendly turnkey watermaker available in  horizontal Turnkey configuration.    All components within the frame are readily accessible for easy maintenance. This unit is designed to fit in tight places.   The SeaPro10K are also available in vertical and modular configurations.    for   Sea Water Desalination SeaPro12K (12,000 GPD)
	Ampac Sea Pro™ Plus Land Based Watermakers  From 20,000 to 100,000 GPD-SW   The Ampac SeaPro20K System is a user friendly watermaker available in  horizontal Turnkey configuration with internal High Pressure Booster Pump for ease of use in compact locations.    All components within the frame are readily accessible for easy maintenance. This unit is designed to fit in tight places.   The SeaPro20K are also available in vertical and modular configurations.

 

Ampac USA Press Release

AMPAC USA provides safe drinking water with reverse osmosis systems, water filters and seawater desalination