16 ranges to choose from
-
Alkaline Water
Alkaline water is drinking water with a pH above 7, usually with added calcium, magnesium and potassium.
- Models
- 3
-
Arsenic Removal
Arsenic contamination of drinking water is a global issue, The maximum concentration of allowable arsenic is 10 Parts per Billion as per WHO (World Health Organization) Standards.
- Models
- 11
- Output
- 1,500 – 80,000 GPD
-
Bacteria Removal
Ultra Violet Filtration is one of the four methods approved by the US FDA.
- Models
- 3
- Output
- 8,000 – 20,000 GPD
-
Brackish Water Treatment Systems
Running a hotel or resort on a brackish well?
- Models
- 26
- Output
- 100 – 100,000 GPD
-
Chlorine Removal
Chlorine is added to municipal water supplies to kill bacteria and it does that job well.
- Models
- 11
- Output
- 6,000 – 100,000 GPD
-
Custom Solutions
Ampac USA System and Process Engineers, Design and Fabricate Water Purification, Water Treatment Solutions, and Seawater Desalination watermakers as per Client's Feed Water Analysis, Requirements and Conditions.
- Models
- 15
- Output
- 1,500 – 100,000 GPD
-
Fluoride Water
More and more people are asking themselves serious questions and seeking serious answers about the Flouride in their drinking and bathing water...is it dangerous?...toxic or poisonous?...will it give me cancer or some other chronic or deadly disease?
-
Hard Water
Hardness is one of the most common water quality problems homeowners, property managers, and facility operators deal with.
- Models
- 7
-
Does Reverse Osmosis Remove Iron? | Iron Removal Systems
Iron and manganese are among the most common groundwater contaminants, causing reddish-brown or black staining, metallic taste, and buildup in pipes, water heaters, and softeners.
- Models
- 16
- Output
- 6,000 – 100,000 GPD
-
KDF GAC Filtration
KDF media is used in place of, or in conjunction with, activated carbon which removes 99% of the chlorine taste and odor in municipal water by bonding to KDF media.
- Models
- 2
-
Nitrate Removal
Nitrates are very soluble and do not bind to soils, therefore, they have a high potential to migrate to groundwater sources.
- Models
- 2
-
Oil/ Water Separation
Produced water from oil and gas operations, oily wastewater from industrial equipment washing, bilge water from marine vessels, and runoff from fuel storage facilities all share the same challenge: pe
-
Sulfur Removal
Hydrogen sulfide in well water is immediately noticeable - the rotten egg smell is detectable at concentrations as low as 0.5 parts per billion.
- Models
- 1
-
Water Treatment Technologies
AMPAC USA engineers water treatment systems using reverse osmosis, ultrafiltration, UV disinfection, ozone oxidation, and electrodeionization (EDI) — each suited to different contaminants and purity requirements.
- Models
- 28
- Output
- 100 – 100,000 GPD
-
Salt Water Reverse Osmosis System & Seawater Desalination
Seawater reverse osmosis (SWRO) forces ocean water through a semi-permeable membrane at 800–1,000 PSI, rejecting dissolved salts and producing permeate water under 500 ppm TDS from source water at 35,000 ppm.
- Models
- 35
-
Does Reverse Osmosis Remove Lead? Lead Removal Systems
Lead enters drinking water primarily through aging lead pipes and lead-based solder in older plumbing, and the EPA's action level is 15 ppb.
- Models
- 5
About Water Treatment Solutions
Sizing a system? Send your flow rate and a feed-water analysis, and an AMPAC engineer will work out the configuration with you.
32 YEARS OF REMARKABLE EXPERIENCE
Recent studies have raised some serious issues with the quality standards of water purification systems, particularly those assembled by importers using lower quality components. At Ampac USA, we only offer water purification solutions and systems for residential, commercial and industrial applications, ultra pure, alkaline water and seawater desalination reverse osmosis watermakers for marine based (i.e.: boats, yachts, ships and navy vessels) land based and offshore (oil platforms) "Class1-Div1" and "Class1-Div2" rating explosion proof applications backed by customer service here in the USA.
Description
In today's marketplace, you need quality water treatment and purification systems and a manufacturer who stands behind quality workmanship and customer service without exception. With Ampac USA you work with our dedicated professional treatment and purification team which can orchestrate professionally-designed water purification and reverse osmosis systems to your required specifications.
Ampac USA engineers design and fabricates standard and custom high purity (ultrapure) reverse osmosis systems for the biotechnology laboratory and institutional markets from 100 to 500,000 gallons per day.
Ampac USA designs advanced standardized systems that are easy to customize to meet your specifications with a quick timely turnaround for submittals and equipment manufacturing. Moreover, Ampac USA supplies standard point of use ultra-pure systems that meet type 1, 2 and 3 laboratory specifications.
From the smallest residential drinking water filters and whole house water filtration systems to the largest water treatment plants and water purification systems for industrial applications, Ampac USA proudly serves the globe with equipment built to your application. Call us to discuss your project.
Applications
Features and Benefits