Iron Manganese Removal Filter 10.0, Iron Removal Filters | Ampac USA
Iron Manganese Removal Filter 10.0
The AMPAC USA Iron Manganese Removal Filter 10.0 - from category Iron Removal Filters is designed to remove high levels of Iron up to 20 ppm, sulfur/hydrogen sulfide (H2S or Rotten-egg odor) up to 15 ppm, manganese, lead, silt, turbidity, and other trace amounts of metals such as copper, arsenic, and uranium.
The AMPAC USA Iron-Manganese Green Sand Filter uses a high-quality manganese greensand media. The system is usually installed on the main water line feeding the whole house.
Green Sand Filter Media oxidize Raw Water Supply by causing precipitation, trapping iron, manganese, hydrogen sulfide present in your water supply resulting in a clean, filtered water flow to your household.
The Green Sand Media is periodically regenerated automatically using potassium permanganate. The system comes with the Potassium Permanganate Tank. (Removal per Cubic Foot
- - 5 ppm of Hydrogen sulfide (rotten egg odor)
- - 15 ppm of both ferric (oxidized) and ferrous (clear) iron
- - 10 ppm of manganese
Note: These systems are designed for water supplies with pH between 6.2 and 8.8. If your water supply has a pH of 6.1 or less, you need to neutralize pH before passing through this system.
|Tank Size:||10" Diameter X 54" Height|
|Required Installation Space:||12" x 24"|
|Plumbing:||3/4" & 1" Plumbing|
|Operating Pressure:||20 - 150 PSI|
|Operating Temperature:||36 - 120|