{"id":89060,"date":"2026-06-16T21:00:00","date_gmt":"2026-06-16T21:00:00","guid":{"rendered":"https:\/\/www.ampac1.com\/blog\/ro-membrane-types\/"},"modified":"2026-06-16T21:00:00","modified_gmt":"2026-06-16T21:00:00","slug":"ro-membrane-types","status":"publish","type":"post","link":"https:\/\/www.ampac1.com\/blog\/ro-membrane-types\/","title":{"rendered":"RO Membrane Types: BW30, SW30, High-Rejection &#038; Fouling-Resistant | AMPAC USA"},"content":{"rendered":"<p>Not all RO membranes are interchangeable. The membrane is the core of an RO system, and selecting the right one for your feed water chemistry and output requirements determines both performance and cost of ownership. This guide covers the major RO membrane types, what differentiates them, and how to match membrane selection to application.<\/p>\n<h2>How RO Membranes Are Classified<\/h2>\n<p>RO membranes are classified along three primary axes:<\/p>\n<ol>\n<li><strong>Application type:<\/strong> Brackish water (BW) vs. seawater (SW) \u2014 determined by feed water TDS and required operating pressure<\/li>\n<li><strong>Performance profile:<\/strong> Standard rejection vs. high rejection vs. low-energy vs. fouling-resistant<\/li>\n<li><strong>Element size:<\/strong> 2.5-inch, 4-inch, or 8-inch diameter, in standard lengths of 21, 40, or 60 inches<\/li>\n<\/ol>\n<p>The vast majority of commercial and industrial RO installations use 8-inch \u00d7 40-inch spiral-wound elements. Residential and light commercial systems use 4-inch \u00d7 40-inch elements. 2.5-inch elements appear in compact systems and some pilot or test applications.<\/p>\n<h2>Brackish Water vs. Seawater Membranes<\/h2>\n<p>This is the most fundamental membrane classification. The distinction is not just about salt rejection \u2014 it&#8217;s about the membrane chemistry, required operating pressure, and the applications each type serves.<\/p>\n<table class=\"table table-bordered\">\n<thead>\n<tr>\n<th>Property<\/th>\n<th>Brackish Water (BW)<\/th>\n<th>Seawater (SW)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Feed TDS range<\/td>\n<td>100\u201310,000 ppm<\/td>\n<td>10,000\u201350,000 ppm<\/td>\n<\/tr>\n<tr>\n<td>Typical NaCl rejection<\/td>\n<td>99.0\u201399.7%<\/td>\n<td>99.4\u201399.8%<\/td>\n<\/tr>\n<tr>\n<td>Operating pressure<\/td>\n<td>100\u2013400 PSI<\/td>\n<td>800\u20131,200 PSI<\/td>\n<\/tr>\n<tr>\n<td>Applications<\/td>\n<td>Municipal, well, process, industrial<\/td>\n<td>Coastal desalination, offshore, island water supply<\/td>\n<\/tr>\n<tr>\n<td>Can be used for low-TDS freshwater?<\/td>\n<td>Yes \u2014 standard choice<\/td>\n<td>Not recommended \u2014 over-engineered, unnecessary energy cost<\/td>\n<\/tr>\n<tr>\n<td>Example FILMTEC\u2122 elements<\/td>\n<td>BW30, BW30HR, BW30FR, LE-440<\/td>\n<td>SW30, SW30HR, SW30XHR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Seawater membranes operate at much higher pressures and are not interchangeable with brackish water membranes for freshwater applications. Using a seawater membrane on low-TDS municipal water wastes energy and produces lower flow at standard commercial operating pressures.<\/p>\n<h2>Standard Commercial Brackish Water Membranes<\/h2>\n<h3>FILMTEC\u2122 BW30 \u2014 The Workhorse<\/h3>\n<p>The BW30 series is the most widely used commercial RO membrane globally. 99.5% NaCl rejection (nominal), rated to 600 PSI, operating temperature range 32\u2013113\u00b0F (0\u201345\u00b0C). An 8-inch \u00d7 40-inch BW30-400 element produces 400 GPD (permeate flow) at standard test conditions with feed TDS below 2,000 ppm. Used in AMPAC USA commercial systems from 500 GPD to 20,000+ GPD.<\/p>\n<p>The BW30 is the correct starting point for most commercial applications: municipal feed water, moderate well water (after appropriate pre-treatment), food and beverage, hospitality, car wash, and general industrial process water.<\/p>\n<h3>FILMTEC\u2122 BW30HR \u2014 High Rejection<\/h3>\n<p>The HR designation indicates a higher-rejection active layer: 99.7% NaCl rejection vs. 99.5% for standard BW30. The practical difference at 500 ppm TDS feed is small in absolute terms (1.5 ppm vs. 2.5 ppm permeate TDS), but it becomes significant at higher feed TDS or when permeate TDS targets are strict:<\/p>\n<ul>\n<li>Feed water above 1,500 ppm TDS \u2014 the extra rejection margin keeps permeate TDS within acceptable range where standard BW30 may not<\/li>\n<li>Pharmaceutical or lab water systems where permeate TDS feeds a polishing stage (EDI, mixed-bed DI) \u2014 lower TDS in reduces load on the polishing system<\/li>\n<li>Double-pass RO second stage \u2014 high rejection on the second pass produces very low-TDS intermediate water<\/li>\n<\/ul>\n<p>The BW30HR typically costs 10\u201320% more than a standard BW30 element of equivalent size.<\/p>\n<h3>Low-Energy Membranes (FILMTEC\u2122 LE Series)<\/h3>\n<p>Low-energy membranes achieve comparable rejection to standard BW30 at lower operating pressures, reducing pump energy consumption. A FILMTEC\u2122 LE-440i element produces 440 GPD at 150 PSI vs. the BW30-400&#8217;s 400 GPD at 225 PSI \u2014 the LE element produces more water at lower pressure.<\/p>\n<p>Low-energy membranes make sense when: energy cost is a significant operating concern, feed water pressure is limited, or the system design prioritizes energy efficiency over maximum pressure capability. Trade-off: lower maximum operating pressure means less headroom to compensate for membrane fouling as elements age.<\/p>\n<h3>FILMTEC\u2122 BW30FR \u2014 Fouling Resistant<\/h3>\n<p>FR elements have a modified polyamide surface with lower surface roughness and charge, reducing the adhesion of colloidal particles, organic compounds, and biofilm to the membrane surface. Same rejection as standard BW30 (99.5%) but longer service life in challenging feed waters:<\/p>\n<ul>\n<li>Surface water (river, lake, reservoir) with natural organic matter<\/li>\n<li>Secondary municipal effluent reuse<\/li>\n<li>Industrial wastewater reclaim<\/li>\n<li>Food and beverage process water with organic loading<\/li>\n<\/ul>\n<p>BW30FR elements typically cost more than standard BW30 but extend replacement intervals in applications where standard membranes foul rapidly. In clean municipal water applications, the FR membrane offers no benefit over standard BW30.<\/p>\n<h2>Seawater Membrane Variants<\/h2>\n<table class=\"table table-bordered\">\n<thead>\n<tr>\n<th>Element<\/th>\n<th>NaCl Rejection<\/th>\n<th>Target Application<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>FILMTEC\u2122 SW30-4040<\/td>\n<td>99.4%<\/td>\n<td>Small seawater systems, 4-inch diameter<\/td>\n<\/tr>\n<tr>\n<td>FILMTEC\u2122 SW30-8040<\/td>\n<td>99.4%<\/td>\n<td>Standard seawater production, 8-inch diameter<\/td>\n<\/tr>\n<tr>\n<td>FILMTEC\u2122 SW30HR-8040<\/td>\n<td>99.65%<\/td>\n<td>High-rejection seawater \u2014 where single-pass permeate TDS must be minimized<\/td>\n<\/tr>\n<tr>\n<td>FILMTEC\u2122 SW30XHR-8040<\/td>\n<td>99.75%<\/td>\n<td>Extreme high rejection \u2014 single-pass permeate meets WHO drinking water limits from open-ocean feed<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Membrane Element Sizes: What the Numbers Mean<\/h2>\n<p>Membrane element part numbers encode their size and production rate. For a FILMTEC\u2122 BW30-400:<\/p>\n<ul>\n<li><strong>BW30<\/strong> \u2014 product family (Brackish Water, TFC polyamide)<\/li>\n<li><strong>400<\/strong> \u2014 permeate flow in GPD at standard test conditions (77\u00b0F, 225 PSI, 2,000 ppm NaCl feed, 15% recovery)<\/li>\n<\/ul>\n<p>Common 8-inch commercial element production rates:<\/p>\n<table class=\"table table-bordered\">\n<thead>\n<tr>\n<th>Element<\/th>\n<th>Diameter<\/th>\n<th>Length<\/th>\n<th>Rated GPD<\/th>\n<th>Active Area (ft\u00b2)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>BW30-400<\/td>\n<td>8&#8243;<\/td>\n<td>40&#8243;<\/td>\n<td>400<\/td>\n<td>400<\/td>\n<\/tr>\n<tr>\n<td>BW30-440<\/td>\n<td>8&#8243;<\/td>\n<td>40&#8243;<\/td>\n<td>440<\/td>\n<td>440<\/td>\n<\/tr>\n<tr>\n<td>BW30-365<\/td>\n<td>8&#8243;<\/td>\n<td>40&#8243;<\/td>\n<td>365<\/td>\n<td>365<\/td>\n<\/tr>\n<tr>\n<td>LE-440i<\/td>\n<td>8&#8243;<\/td>\n<td>40&#8243;<\/td>\n<td>440<\/td>\n<td>440<\/td>\n<\/tr>\n<tr>\n<td>BW30HR-440<\/td>\n<td>8&#8243;<\/td>\n<td>40&#8243;<\/td>\n<td>440<\/td>\n<td>440<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Spiral-Wound Construction: Why It&#8217;s Universal<\/h2>\n<p>All commercial RO membranes use spiral-wound construction. A flat membrane envelope (two membrane sheets with a permeate spacer between them, sealed on three edges) is wound around a perforated central permeate collection tube, with feed spacer material between successive membrane layers. The result is a compact cylindrical element that packs large active membrane area into a small volume:<\/p>\n<ul>\n<li>An 8-inch \u00d7 40-inch element contains approximately 400 ft\u00b2 of active membrane area<\/li>\n<li>Feed water enters the ends of the element, flows axially through the feed channels<\/li>\n<li>Permeate passes through the membrane, spirals inward along the permeate spacer, and collects in the central tube<\/li>\n<li>Concentrate exits the opposite end<\/li>\n<\/ul>\n<p>Multiple spiral-wound elements are loaded in series inside a single pressure vessel (typically 2\u20138 elements per vessel in commercial systems). The elements are connected end-to-end with interstage connectors and anti-telescoping devices that maintain element position under operating pressure.<\/p>\n<h2>Hollow Fiber vs. Spiral Wound: Why Spiral Won<\/h2>\n<p>Hollow fiber RO membranes (bundles of hair-thin membrane tubes) were used commercially in early RO systems. They&#8217;ve been largely displaced by spiral-wound elements for most applications because spiral-wound elements tolerate feed-side particulates better, are easier to replace, allow element-by-element inspection, and the economics of spiral-wound manufacturing have driven costs down. Hollow fiber membranes persist in some ultrafiltration pre-treatment stages, but in RO, spiral-wound is the standard.<\/p>\n<h2>Selecting the Right Membrane for Your Application<\/h2>\n<table class=\"table table-bordered\">\n<thead>\n<tr>\n<th>Application<\/th>\n<th>Recommended Membrane<\/th>\n<th>Reason<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Municipal water, standard commercial<\/td>\n<td>FILMTEC\u2122 BW30<\/td>\n<td>Proven performance, lowest cost per GPD, parts availability<\/td>\n<\/tr>\n<tr>\n<td>High-TDS feed (&gt;1,500 ppm) or strict permeate TDS target<\/td>\n<td>FILMTEC\u2122 BW30HR<\/td>\n<td>Higher rejection margin needed<\/td>\n<\/tr>\n<tr>\n<td>Energy-constrained installations or low-pressure feed<\/td>\n<td>FILMTEC\u2122 LE series<\/td>\n<td>Achieves target output at lower operating pressure<\/td>\n<\/tr>\n<tr>\n<td>Surface water, wastewater reuse, organic fouling risk<\/td>\n<td>FILMTEC\u2122 BW30FR<\/td>\n<td>FR surface resists fouling, extends replacement interval<\/td>\n<\/tr>\n<tr>\n<td>Pharmaceutical, laboratory, semiconductor UPW (first-pass)<\/td>\n<td>FILMTEC\u2122 BW30HR<\/td>\n<td>Higher rejection reduces EDI\/DI polishing load<\/td>\n<\/tr>\n<tr>\n<td>Seawater desalination<\/td>\n<td>FILMTEC\u2122 SW30 or SW30HR<\/td>\n<td>Designed for high operating pressures and seawater TDS<\/td>\n<\/tr>\n<tr>\n<td>Food &amp; beverage (NSF-required)<\/td>\n<td>FILMTEC\u2122 BW30 (NSF\/ANSI 58 certified)<\/td>\n<td>NSF certification required for food contact water<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>AMPAC USA systems use FILMTEC\u2122 membranes manufactured by DuPont under ISO 9001 quality management. For critical or high-purity applications, FILMTEC\u2122 elements include traceable manufacturing documentation and established validation packages. Replacement elements for AMPAC USA systems are available directly from AMPAC USA with guaranteed compatibility.<\/p>\n<p><strong>Need membrane selection guidance for your application?<\/strong> <a href=\"\/contact\">Contact AMPAC USA<\/a> with your feed water TDS, target permeate quality, and daily flow requirement \u2014 we&#8217;ll specify the right membrane and size the system for your operating conditions.<\/p>\n<p><em>Related: <a href=\"\/blog\/how-reverse-osmosis-works\/\">How Reverse Osmosis Works<\/a> | <a href=\"\/blog\/ro-recovery-rate-explained\/\">RO Recovery Rate Explained<\/a> | <a href=\"\/blog\/ro-rejection-rate\/\">RO Rejection Rate: What It Means and How to Measure It<\/a><\/em><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Not all RO membranes are interchangeable. The membrane is the core of an RO system, and selecting the right one for your feed water chemistry&#8230;<\/p>\n","protected":false},"author":0,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[497,496,1],"tags":[],"class_list":["post-89060","post","type-post","status-publish","format-standard","hentry","category-497","category-496","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/posts\/89060","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/comments?post=89060"}],"version-history":[{"count":0,"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/posts\/89060\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/media?parent=89060"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/categories?post=89060"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ampac1.com\/blog\/wp-json\/wp\/v2\/tags?post=89060"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}