Commercial Reverse Osmosis 2,200 GPD/8.3m3/day| AP2200

Commercial Reverse Osmosis 2,200 GPD/8.3m3/day| AP2200

Ampac USA Reverse Osmosis Model AP2200

Commercial Reverse Osmosis 2200 GPD | 8300 LPD

The Ampac USA Commercial Reverse Osmosis 2,200 GPD/8.3m3/day| AP2200 is the result of 20 years experience with the needs and requirements of commercial pure water users. The key factors are reliability, serviceability, and consistent performance with minimum user intervention are achieved in the solid design of the Ampac USA Reverse Osmosis Systems. 

The Ampac USA RO Systems are designed for Free Standing Applications, to allow flexibility in accommodating the limited space available in most commercial utility equipment locations. Quick connect tube fittings on all system ports further simplifies installation and service. Most importantly, all our models incorporate the most reliable combination of proven reverse osmosis hydraulic design and state of the art Thin Film Membrane Elements to provide the longest term performance expected by commercial users.  The welded Aluminum Frame with the Aluminum Diamond Plate allows easy access to all major system components.


Standard Features:

  • Spin Down Screen Filter with Manual Flush Valve
  • 2½” x 20” Big Blue Sediment Pre-Filter 20 Micron
  • 2½” x 20” Big Blue Sediment Pre-Filter 05 Micron
  • Horizontal Rotary Vane High-Pressure Jet Pump with Safeguards for Brackish Water Applications
  • 4” x 40” FRP Pressure Vessels
  • 4” x 40” TFC Membrane Element
  • Complete Panel for Easy Controls
  • 3 Count Stainless steel liquid-filled pressure gauges
  • Permeate and concentrate flow meters
  • Inlet Solenoid Valve with Bypass
  • Low pressure cut off Pressure Switch
  • Stainless Steel System Pressure Control
  • Stainless Steel Recycle Pressure Valve
  • On/Off Main Power Switch.
  • Powder-coated, Welded Aluminum Frame with Aluminum Diamond Plate.

Optional Features:

  • Automatic Operating Programmable logic controller UL/CE Approved with:
    • Smart Relay
    • Delayed start-up of high-pressure pump
    • Inlet Solenoid Valve
    • Low & High Feed Pressure Switch Controls
    • Supply & Delivery Pumps Controls
    • R/P Storage Tank Full Pump on/off
    • Auto Flush Cycle
    • Pre-Treat Lockout
    • TDS/Conductivity Monitor
    • Temperature Monitor
    • Hour Meter
  • Silica quartz Pre-Filter w/auto-backwash valve
  • Ion Exchange Water Softener w/auto-backwash valve
  • Multimedia KDF-Catalytic Carbon-Poly Phosphate Pre-Filter w/auto-backwash valve
  • Anti-Scalant Dosing System (Hard Water Present Conditions)
  • Chlorine Dosing System (Iron Manganese Present Conditions)
  • 4” x 10” Carbon Post-Filter 05 Micron
  • Ultra Violet Sterilizer
  • Smart-on-Demand Delivery (Distribution) Pump to Point of Use
  • Smart-on-Demand Supply Pump to increase Feed Water Pressure 1HP
  • Ozone Generator Disinfection System Installed on Circulation Loop.

System Features:

Frame Powder Coated One Piece Aluminum w/Diamond Plate
Membranes (1) ea TFC 4" x 40"
Vessels 4" x 40" Stainless Steel or FRP
Pump Procon Rotary Vane with Safeguards (SS option)
Gauges - Glycerin Filled Pre-Filter PSI, Post-Filter PSI, Booster Pump PSI
Valves System Pressure, Recycle Pressure
Switches Low PSI Cutout, Tank Full Cutout
Electrical 110 or 220 V, 50 or 60 Hz, 1 phase
Motor GE 3/4 Hp - 1725 rpm
Connections 1/2" Quick Tubing Connectors
Capacity per US Gallon 1.53 gal per min - 2,200 gals per day
Capacity per Liters 5.79 Liters per min - 8,337 Liters per day
Operating Pressure 170 - 225 psi
Typical Recovery 50% - 75%
Typical Rejection 99%
Max Feed TDS - Hardness 2500 ppm - 15 grains For Municipal Water Design
Max Feed TDS - Hardness 10,000 ppm - 25 grains For Brackish Water Design
Max Feed Temp 113 degrees F
Feed pH Range 2-11
Max Chlorine less than 0.1 ppm
Dimensions 18" wide x 18" deep x 57" ht.
Weight 140 Lbs. / 64 Kgs.

Make of System: Fully automated Turnkey Water Purification System including pre-treatment Modules and Reverse Osmosis System fully built on a Powder Coated welded Aluminum Skid with Diamond Plate Base using good industrial practice and following manufacturer’s guidelines for every component.

Make of System: AP2200

Origin: Made in USA

Backwash & Regenerations Cycle: Ion Exchange System Cycle on Metered Basis, Multimedia System Cycle on Timer Basis and can be Adjustable up to 120 Minutes at any given time.

Delivery Terms:  System is ready to be crated and shipped, on average 2-3 Weeks from the day of receipt of purchase order.

System production is based on the following conditions: 10,000ppm NaCI feed water, 77°f/ 25°c Operating temperature and 3.0-11.0pH Range.  Actual feed water analysis may require special consideration affecting final design and pricing.

Specifications
Capacity: Gallons Per Day 2,200 GPD
Capacity: Liters Per Day 8,300 LPD
High Pressure Pump HP 3/4 HP
Max Feed TDS 10,000 PPM
Recovery 50% - 75%
Salt Rejection % 99.2%
Voltage 110V or 220V / 50Hz or 60Hz Single Phase or as per Client Requirement.
Filter Stages
Number of Filter Stages 2
Number of Membrane Elements 1

Write a review

Note: HTML is not translated!
    Bad            Good

  • Views: 11620
  • Brand: Ampac USA
  • Product Code: AP2200
  • Made in USA
  • Availability: In Stock
0 Product(s) Sold
  • $4,295.00
Ampac USA Commercial Reverse Osmosis 2,200 GPD/8.3m3/day| AP2200 QR Code