Industrial Reverse Osmosis 10,000 GPD | 1.6m3/hr | AP10K-LX

Industrial Reverse Osmosis 10,000 GPD | 1.6m3/hr | AP10K-LX

Ampac USA RO System Model AP10K-LX

Industrial Reverse Osmosis 10,000 GPD | 1.6m3/hr

Ampac USA Reverse Osmosis Model AP10K-LX

The Ampac USA Fully Equipped LX Series Industrial Reverse Osmosis 10,000 GPD | 1.6m3/hr | AP10K-LX  the result of 20 years of experience with the needs and requirements of commercial pure water consumers with brackish and well water applications. This includes restaurants, coffee stores, convenience stores, microbreweries, food preparation operations, misting and humidification systems, car wash facilities, and many other businesses that require consistent pure water for their daily operations. The key factors are reliability, serviceability, and consistent performance with minimum user intervention that are achieved in the solid design of the Ampac USA LX Series systems. Powder Coated Fully Welded Aluminum is used to build our frames, Stainless Steel pressure vessels and fastening hardware to provide the structural strength and corrosion resistance appropriate for a commercial appliance.


Standard Features:

  • Spin Down Screen Filter with Manual Flush Valve
  • Ion Exchange Water Softener w/auto-backwash valve
  • Multimedia KDF-Catalytic Carbon-Poly Phosphate Pre-Filter w/auto-backwash valve
  • Twin 4” x 20” Big Blue Sediment Pre-Filter 05 Micron in Parallel
  • Horizontal Multi Stage High-Pressure Jet Pump w/Safeguards for Brackish Water
  • 8” x 40” FRP Pressure Vessels
  • 8” x 40” TFC Membrane Element
  • Smart-on-Demand Delivery (Distribution) Pump to Point of Use 2HP.
  • 4” x 10” Big Blue Carbon Post-Filter 05 Micron
  • Ultra Violet Sterilizer
  • Powder-coated, Welded Aluminum frame with Aluminum Diamond Plate.

Intrumentations:

  • Automatic Operating Programmable logic controller UL/CE Approved with:
    • Smart Relay
    • Delayed start-up of high-pressure pump
    • Inlet Solenoid Valve
    • Low & High Feed Pressure Switch Controls
    • Supply & Delivery Pumps Controls
    • R/P Storage Tank Full Pump on/off
    • Auto Flush Cycle
    • Pre-Treat Lockout
    • TDS/Conductivity Monitor
    • Temperature Monitor
    • Hour Meter
  • Complete Panel for Easy Controls
  • 4 Count Stainless steel liquid-filled pressure gauges
  • Permeate and concentrate flow meters
  • Inlet Solenoid Valve with Bypass
  • Low pressure cut off Pressure Switch
  • Stainless Steel System Pressure Control
  • Stainless Steel Recycle Pressure Valve
  • On/Off Main Power Switch.

Optional Features:

  • Anti-Scalant Dosing System (Hard Water Present Condiotons)
  • Chlorine Dosing System (Iron Manganese Present Conditions)
  • Smart-on-Demand Supply Pump to increase Feed Water Pressure 1HP
  • Ozone Generator Disinfection System Installed on Circulation Loop.
  • Silica quartz Pre-Filter w/auto-backwash valve

R/O System Features:

Frame Powder Coated One Piece Aluminum w/Diamond Plate
Membranes (1) ea TFC 8" x 40"
Vessels 8" x 40" FRP
Pump Goulds Multi-Stage Jet Pump with Safeguards (SS option)
Gauges - Glycerin Filled Pre-Filter PSI, Post-Filter PSI, Booster Pump PSI
Valves System Pressure, Recycle Pressure
Switches Low PSI Cutout, Tank Full Cutout
Electrical 110/220 V/380/440 / 50 or 60 Hz, single or Three phase
Motor

3 Hp - 1725 rpm

Connections 1½" Quick Tubing Connectors
Capacity per US Gallon 7.0 GPM - 10,000 GPD
Capacity per Liters 26.5 LPM - 38,160 LPD
Operating Pressure 170 - 225 psi
Typical Recovery 33% - 70% (Depends on Feed Water Salinity & Hardness)
Typical Rejection 99%
Max Feed TDS - Hardness 2500 ppm - 15 grains For Municipal Water Design
Max Feed TDS - Hardness 10,000 ppm - 25 grains For Brackish Water Design
Max Feed Temp 113 degrees F
Feed pH Range 2-11
Dimensions 84" wide x 44" deep x 72" height.
Weight 650 Lbs. / 295 Kgs.

Make of System: Fully automated Turnkey Sea Water Desalination System including pre-treatment Modules and Reverse Osmosis System fully built on a Powder Coated welded Aluminum Skid with Diamond Plate Base using good industrial practice and following manufacturer’s guidelines for every component.

Make of System: AP10K-LX

Origin: Made in USA

Backwash & Regenerations Cycle: Ion Exchange System Cycle on Metered Basis, Multimedia System Cycle on Timer Basis and can be Adjustable up to 120 Minutes at any given time.

Delivery Terms: System is ready to be crated and shipped, on average 2-3 Weeks from the day of receipt of purchase order.

Specifications
Capacity: Gallons Per Day 10,000 GPD
Capacity: Liters Per Day 37,850 LPD
Feed Pump HP 1HP
High Pressure Pump HP 3 HP
Recovery 50 - 75%
Salt Rejection % 99.2%
Voltage 240V / 380V / 460V - 50Hz / 60Hz as per Client Requirement.
Filter Stages
Number of Filter Stages 6
Number of Membrane Elements 1 Element (8" x 80")

Write a review

Note: HTML is not translated!
    Bad            Good

  • Views: 40946
  • Brand: Ampac USA
  • Product Code: AP10K-LX
  • Made in USA
  • Availability: In Stock
0 Product(s) Sold
Ampac USA Industrial Reverse Osmosis 10,000 GPD | 1.6m3/hr | AP10K-LX QR Code

Tags: Industrial Reverse Osmosis 10 , 000 GPD/ 1.6m3/hr , AP10K-LX , Industrial RO 10000 Gallon per day , Industrial RO 10k GPD