Reverse Osmosis, Water Softener, Water Filter, Carbon Filter, GAC Filters, Water Treatment, Sea Water, Water Cooler

Home Up Feedback Contents Search About Us Shop Online

Velaro Live Help

Home
Up 

mc.jpg (6738 bytes)Visa.jpg (6776 bytes)amex.gif (34023 bytes)

Official PayPal Seal

bottlema2.gif

(877) 611-8530

Toll Free USA

 

 

(818) 700-8015

Main Office USA

 

(818) 700-2895

FAX USA

 

+1(44) 207-993-8638

London UK Office

 

+1(52) 555-350-0716

Mexico City Office

 ampac@ampac1.com English

espanol@ampac1.com  Español

 

francais@ampac1.com

Français

Leasing Available Through

tdsshow.JPG (5219 bytes)TDSx1  Purchase Online
0-999ppm TDS Meter Pocket-Size  US$ 23.95
The only way to assure that your reverse osmosis system is operating at maximum efficiency is to check the total dissolved solids level in the source and product water.

Your reverse osmosis should remove at least 85% of all dissolved solids. If your system is removing less than this percentage of dissolved solids, you need to replace you reverse osmosis membrane.

TDSx2

0-999ppm TDS Meter Pocket-Size  US$ 39.95
This Water Proof Tester will assure you that your reverse osmosis system is operating at maximum efficiency by checking the total dissolved solids level in the source and product water.

Before using R/O System
(TDS range from 250-450ppm)

After using R/O System
(TDS range from 5-26 ppm)

TDS1.gif (1567 bytes)

250 ppm

TDS2.gif (1567 bytes)

10 ppm
 
PRECIPITATORS  ( Electronic Color Testers) TDSx4

The best tester tool to prove 

Reverse Osmosis Systems Efficiency.

TDSx4 Features


  Easy to carry and manage with folding legs.
  Easy to set testing time with an operating timer.
  Easy operation with three indicator lights.
 The Tester has a durable external body.
  It is seldom effected by outside impact.

First Step

Elec1.jpg (3045 bytes)

Second Step

Elec2.jpg (2802 bytes)

R/O Water show only a little yellow & clear.  Tap Water (city water) show rust & dirt.

Specifications

  power source : 110V ~ 220V
  Timer range : 1 ~ 15MIN
  MAX operating TDS : 500ppm

Secure Purchase Online

 

Secure Purchase Online 

Secure Purchase Online 

Features:

Features:

  The monitor has two sensors that will operate when it senses the difference of TDS between the supplied water and the purified water though the R/O membrane.

  If the TDS does not drop to the desired rate while purifying the water, the red light will turn on and make a buzzing sound.

  The water purifies can be purified with requiring rates defermined by the client.  Commonly it is produced at the following range.
  High-5%, Med-15% , Low-35%. 

  Can take measurement at two points with in & out probes, Usually at Feed inlet and Product out-let. 
 

  Easy installation.

  Power is off automatically after 10 minutes of non-use

Specifications

   Range : 1 ~ 9990ppm
   Accuracy : ± 2%
   Battery : 2x 1.5V (Button Cell)
   Size : 76mm x 20mm x 47mm(L x W x H)

Specifications

   Range : 1 ~ 9990ppm
   Accuracy : ± 2%
   Battery : 2x 1.5V (Button Cell)
   Size : 76mm x 20mm x 47mm(L x W x H)
 

 

[ Home ] [ Up ]

Send mail to sales@ampac1.com with questions or comments about this web site.
Copyright 2000 Neftech, Inc.