Aquatec is the
world leading in RO booster pump. Offers superior design
characteristics, which enable the pumps to perform smoother and more
efficiently. Advanced composite diaphragm and integral piston design.
Low Flow Pump
(Part# CDP 6800)
• Adjustable max. output psi
• Expels trapped air
• New motor venting system to remove moisture
• Head up or down mounting position
• EMI/RFI electronic noise suppression
• 100% final performance tested
• 1/4" Push-In Ports.
High Flow Pump(Part#
CDP 8800)
• Adjustable max. output psi
• Expels trapped air
• New motor venting system to remove moisture
• Head up or down mounting position
• EMI/RFI electronic noise suppression
• 100% final performance tested
• 3/8" Push-In Ports.
Permeate Pump
(Part# ERP 1000)
• For membrane rated 10-120 GPD
• Requires no electricity
• Improves water quality
• Fills product tank up to 5 times faster
• Effective for inlet water pressure as low as 30psi
• Power by energy from brine lost in the drain
• Saves 400% of waste water
• Increase membrane life.
Low Pressure Switch (Part# LPP-T)
• Shutoff the pump when feed water is interrupted
• Inlet pressure: 60 psi max.
• Accuracy range 1-5 psi, factory preset at 2.3 psi
Tank Shutoff Switch (Part# PSW 350)
• Shutoff the pump when tank is full
• Can be set at various shutoff pressure
Tank Level Control (Part# TLC DC 900)
• Conserve water
• Separately adjustable ON/OFF levels
• Positive level control and water shutoff
Transformer: For Low Flow Pump • TAS 104-19EP: 100VAC/24VAC 800mA
• TAS 114-19EP: 115VAC/24VAC 800mA
• TAS 234-19EP: 230VAC/24VAC 800mA
• TAS 234-19IM: 230VAC/24VAC 1A
Transformer: For High Flow Pump • TACS 104-48: 100VAC/24VAC 2A
• TACS 114-48: 115VAC/24VAC 2A
• TACS 234-48: 230VAC/24VAC 2A
Contact us
with questions or comments about this web site.
Copyright 2000 AMPAC USA,
Inc.