Ampac Six Stage Reverse Osmosis System with Aquatec Booster Pump

This Ampac Six Stage Reverse osmosis W/Booster Pump drinking water system is a high capacity 36 to 100 GPD (gallon per day) system designed for Homes with Low Pressure Feed, high usage, and custom installations where the system will feed more than one faucet. It is equipped with a Booster Pump (Silent) to raise the pressure from 0 PSI to 65 PSI. It can be also equipped with an optional high flow delivery pump that greatly increases flow rate. The Ampac™ APRO6-P features a TFC membrane, and is offered with an optional ultraviolet.

If your feed water come from a well, then this is the ideal system for your home.

Standard Features:

	Aquatec CDP6800 Pump for up to 50GPD.
	Aquatec CDP8800 Pump for up to 100GPD.
	10" Sediment Pre-Filter 5 M. Polypropylene.
	10" KDF-GAC Pre-Filter Cartridge.
	10" Carbon Block Pre-Filter.
	TFC Membrane & Auto. Shut-off Valve.
	In-Line GAC Post-Filter.
	4.4 Gallons Pressure Tank With Ball Valve.
	Standard Long Reach SS Lead Free Faucet.
	All Quality Color Coded Tubing Included.
	Feed Water Valve, and Drain Valve.
	Heavy Duty, Built-in Check Valve.
	Available 120V/60Hz, and 220V/50Hz.
	Installation Manual, Registration Card.
	Price $ 379.95

Optional Features:

	10g. to 86g. Pressurized Bladder Tank.
	36, 50, 75, 100 GPD (gallons per day).
	Membrane Vessel with Pressure Gauge.
	Ultra Violet Lamp.
	KDF-GAC-Poly Phosphate Pre-Filter.
	Color Faucets.
	Aquatec CDP6800 or 8800 Booster Pumps.
	Aquatec ERP100 Permeate Pumps.
	Aquatec DDP5800 Delivery Pumps.

Optional Features:


Wave White Faucet	Wave Chrome Faucet	Airgap Faucet

Water Quality Monitor

All Ampac Reverse Osmosis System comes with the following accessories:


Drain Saddle Valve	Water Feed Adapter	Tank Ball Valve

Long Reach (Prop 65) Chrome Faucet	Water Storage Tank	Installation Manual & Warranty

CDP 6800 Series Low Flow Booster Pump

Distinguishing Features

Toughest, most durable pump on market

Adjustable max. outlet psi (regardless of feed pressure)

Expels trapped air (no more air locks)

Can be mounted w/pump head up or down

More flow at extremely low inlet pressures

New motor venting system to remove moisture

EMI/RFI electronic noise suppression

100% final performance tested.

Key Operating Benefits

Boosts pressure 40 to 120 psi (adjustable)

Fixed pressure to 160 psi

Up to 30,000+ operating hours

Whisper quiet - less than 45 DBA

Can run dry without damage

Self-priming - 60" lift

Low voltage (12-24V) for maximum safety

Corrosion resistant exterior

Continuous or intermittent operation

Technical Specifications

OPERATION: The 6800 is designed to operate with a PSW Tank Shut-Off Switch for hydro-pneumatic storage systems. The PSW, when used with a typical under-counter R.O. system, can be augmented with an ESO Electronic Shut-Off Valve. It is also compatible with most hydraulic shut-off valves. For counter-top systems, Aquatec's TLC Tank Level Control Switch Valve shut off feed water and the pump when the product water storage tank is full.
POWER: Pumps operate with low energy (only 14 watts), low voltage (12-24 volt) motors, powered with compatible transformers with world wide primary voltages available (100 VAC, 120 VAC, 230 VAC). Transformers are optional and must be ordered in addition to the pump.
MOUNTING PLATES: The "flexible or steel" base plates are included at no extra cost. The "Universal" base plate P/N 51-104 is available optionally at additional cost.
FITTINGS: Built-in 1/4" John Guest half cartridge fittings eliminate need for external fittings (unless elbows are required); 1/4" Jaco straight, 1/4" Jaco elbow fittings, or 8mm stem adapters for metric tubing are optionally available.
INSTALLATION: The location and positioning of the pump may affect its' performance. Always consult the factory for recommendations that will optimize your system.

CAP 8800 Series High Flow Booster Pump

Distinguishing Features

Toughest, most durable pump on market

Adjustable max. outlet psi (regardless of feed pressure)

Expels trapped air (no more air locks)

Can be mounted w/pump head up or down

More flow at extremely low inlet pressures

EMI/RFI electronic noise suppression

New motor venting system to remove moisture

100% final performance tested.

Key Operating Benefits

Boosts pressure 40 to 120 psi (adjustable)

Used with membranes 50 to 100 GDP

15,000+ operating hours

Quiet - less than 52 DBA

Can run dry without damage

Self-priming - 60" lift

Low voltage (12-24V) for maximum safety

Corrosion resistant exterior

Technical Specifications

OPERATION: The CDP 8800 is designed to operate with a PSW Tank Shut-Off Switch for hydro-pneumatic storage systems. The PSW when used with a typical under-counter R.O. system, can be augmented with an ESO Electronic Shut-Off Valve. It is also compatible with most hydraulic shutoff valves. For counter-top systems, Aquatec's TLC Tank Level Control Switch Valve shut off feed water when the product water storage tank is full. The AFR Auto-Flush Valve is highly recommended for higher production membranes requiring a CDP 8800, to ensure membrane efficiency.
POWER: Pumps operate with safe, low energy (only 24 watts), low voltage (12-24 volt) motors, powered with compatible transformers with world wide primary voltages available (100 VAC, 120 VAC, 230 VAC). Transformers are optional and must be ordered in addition to the pump.
MOUNTING PLATES: The steel base plate is included at no extra cost. The "Universal" base plate P/N 51-104 is optionally available at no additional cost.
FITTINGS: Built-in 3/8" John Guest half cartridge fittings eliminate need for external fittings (unless elbows are required); Optional at no cost are 3/8" Jaco straight, 3/8" Jaco elbow fittings, or 8mm stem adapters for metric tubing. The location and positioning of the pump may affect its' performance. Consult the factory for recommendations that will optimize your system.

Ampac Six Stage Reverse Osmosis System with Aquatec Booster Pump

Standard Features:

Optional Features:

CDP 8800 High Flow Booster Pump